Support Remote Diagnostic function
Free Donet License--It is support to insert the device to your car and you do the diagnostic in your home or let the engineer to help you do the diagnostic in another place.

Support J2534 protocol
Standard OBD2 automotive diagnostic equipment, support SAE J2534 and ISO 22900 PDU protocols.

WIFI/USB Connection
The device need to work with laptop,you can connect the device to your laptop via the USB cable or WIFI,
It supports WIFI and USB communication to transmit the vehicle data to the laptop via the diagnostic software.

Free to update license for JLR and firmware
The device include the license for JLR, you are not need to pay the license for JLR again, if the license time was expired, you can directly update it in our driver app 'VX-Manager".

VIN Scan Function

Auto VIN Scan
The VIN code entry screen allows the operator to connect the device to communicate with the vehicle and the ignition switch is in the 'on' position, by selecting the "read" (read) option to automatically obtain the vehicle's VIN code. The operator selects the "identity vehicle" option to continue.

Manual Enter VIN
If communication with the vehicle cannot be established, or the VIN code cannot be read automatically, the complete 17-digit VIN code can be entered manually. Then select the "identity vehicle" option to continue.

All System Diagnostics

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems, such as ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System etc.

Multi Service Functions

1> Oil Reset Service
This function enables you to reset the oil service for the engine oil life system,which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.

2> Electronic Parking Brake Reset
This function enables you to reset the brake pad after replacing the brake pad.

3> Steering Angle Calibration
This function enables you to reset the steering angle,after replacing thesteering angle position sensor,replacing steering mechanical parts (such assteering gearbox,steering column, end tie rod, steering knuckie), performingfour-wheel alignment, or recovering car body.

4> ABS Bleeding
This function allows you to perform various bi-directional tests to check theoperating conditions of Anti-lock Braking System(ABS).

5> Gear Learning
This function enables you to perform tooth learning for the car, to turn off the MIL.

6>Gearbox Matching
This function enables you to complete the gearbox self-learning to improvegear shifting quality.

7> Injector Coding
This function enables you to write injector actual code or rewrite code inthe ECU to the injector code of the corresponding cylinder,so as to moreaccurately control or correct cylinder injection quantity.

More...

Active Test & Bi-directional Control

Bi-Directional Control which is used to request information or command a module to perform specific tests and functions .

Bi-directional makes VCX SE more than a tool that receives information from the tool but also a tool that can send commands to control the component. In this case, it is easier for mechanics to identify and troubleshoot problems without going under the cars. Some features for your reference:

Turn on/off the front and rear side ACM solenoid, Cycling the A/C, Clutch on and off, Left clutch electromagnetic coil test, Acceleration device test, Oil pressure control test, Vehicle level position calibration, Brake Vacuum Pump, Inlet, and Outlet Valve test, Open Brakes tests, Parking brake test...

ECU Programming

VXDIAG VCX SE automotive diagnostic tool has the capability to program new ECUs or reflash old modules like ECM, PCM, BCM and etc after replacement for the car models to solve issues like drivability, power loss, fuel efficiency and fault codes.

ECU Coding

Why does the car not work properly after replacing the ECU/module?

When the ECU/module is damaged, replacing it with a new ECU/module is necessary. After processing the replacement, you must follow the manufacturer's strict procedures for matching, learning, coding, and even programming it to get the car to run properly. Otherwise, the car could not start, or some parts will not work. VCX SE can help you do that.

VCX SE Support Advanced ECU Coding Functions (Online Coding, Offline Coding, Flash Hide Functions)

Code Adaptive Data: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. VCX SE has the ECU coding function to recognize new actuators after you change the fault actuators or parts.

Recognize Replaced Modules: ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

Flash Hidden Functions: This feature is used to activate hidden features that most car manufacturers include that are not available to the average car owner. Examples include corrective consumption calculation, seat belt warning, auto start/stop, hidden menus, daytime running lights, cruise control, automatic locking and unlocking of the central locking, comfort windshield washer, welcome lights, etc. To enable most of these functions, it is enough to activate them (in the car's "brain"), while for some others it is necessary to install additional missing modules in the car.

Key Programming

This function enables you to perform the anti-theft key matching function, sothat the immobilizer control system on the car identifies and authorizes remotecontrol keys to normally use the car.
lt needs to be performed in the following cases:
When the ignition switch key, ignition switch,combined instrument panel,ECU,BCM, or remote control battery is replaced.